All

12/24/48/All

Showing 469–480 of 488 results

  • Staggered AP and Antenna All-Thread Drop Mount in Black

    Add to Quote Cart

    Staggered AP and Antenna All-Thread Drop Mount in Black

    ATS-03574 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-BLK). The AccelTex Staggered AP and Omni or Patch Antenna All-Thread Drop Mount in black is an updated solution to mount an AP and an antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the antenna on the top level or vice-versa.

    SKU: ATS-03574 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    ATS-02519 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount is an updated solution to mount an AP and an Antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the Antenna on the top level OR vice-versa.

    SKU: ATS-02519 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    ATS-02947 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-C1-K). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount allows an AP and an Antenna to be placed in one location using All-Thread or a Beam Clamp. This latest version has a new beam clamp mounting design to allow for better adjustment to meet the size of beam clamps. The range of beam sizes that the beam clamp can mount to is from 1.5″ wide to 3″ wide up to 5/8″ thick.

    SKU: ATS-02947 Categories: ,

  • The Accelerator Site Survey Battery Pack V0 (Non 802.3 Compliant)

    Add to Quote Cart

    The Accelerator Site Survey Battery Pack V0 (Non 802.3 Compliant)

    ATS-01696 (former catalog number ATS-SSBP-0). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.

    Please note this is a 15W battery pack (non 802.3 compliant). This does not ship with the protective leather battery pack case with straps and velcro, but may be purchased separately.

    SKU: ATS-01696 Categories: ,

  • The Accelerator Site Survey Battery Pack V1

    Add to Quote Cart

    The Accelerator Site Survey Battery Pack V1

    ATS-01698 (former catalog number ATS-SSBP-1). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.

    SKU: ATS-01698 Categories: ,

  • The Accelerator Site Survey Battery Pack V2

    Add to Quote Cart

    The Accelerator Site Survey Battery Pack V2

    ATS-01702 (former catalog number ATS-SSBP-2). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.

    SKU: ATS-01702 Categories: ,

  • Universal AP 2×2 Ceiling Tile Enclosure Mount (White Bubble)

    Add to Quote Cart

    Universal AP 2×2 Ceiling Tile Enclosure Mount (White Bubble)

    The AccelTex Solutions Universal AP Ceiling Tile Enclosure Mount allows an AP to be flush mounted in a ceiling tile grid. This version features a while bubble on the door to accommodate different manufacturer access points (APs). This mount also has a universal design making it compatible with multiple enterprise-class AP releases – including a bracket that can be tilted to adjust AP angle.

    SKU: ATS-03835 Categories: ,

  • Universal AP All-Thread Drop Mount

    Add to Quote Cart

    Universal AP All-Thread Drop Mount

    ATS-00716 (former catalog number ATS-DRPMNT-UNIV1). The AccelTex Solutions Universal All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00716 Categories: ,

  • Universal AP and Antenna Articulating Mount v3

    Add to Quote Cart

    Universal AP and Antenna Articulating Mount v3

    ATS-02853 (former catalog number ATS-APANTARTMNT-UNIV3). The AccelTex Solutions Universal AP and Antenna Articulating Mount Version 3 allows an AP and an antenna to be mounted in the same location. The mount can be fastened to a ceiling or wall, to an I-beam or to a piece of all-thread. The mount allows both horizontal and vertical articulation of the antenna. This mount includes a long TBAR mounting plate and includes special insert holes for APs that use DART connectors.

    The Version 3 has the following modifications:

    • Aruba mounting hole pattern has been added to all included mounting plates for better compatibility with newer Aruba APs.
    • All-thread mounting bracket has been redesigned to enhance mounting security and safety.

    Antenna adapter plates are available for better compatibility:

    • ATS-00518
    • ATS-00519
    SKU: ATS-02853 Categories: ,

  • Universal AP and Antenna Articulating Mount v3 – Black

    Add to Quote Cart

    Universal AP and Antenna Articulating Mount v3 – Black

    ATS-02854 (former catalog number ATS-APANTARTMNT-UNIV3-BLK). The AccelTex Solutions Universal AP and Antenna Articulating Mount Version 3 in black allows an AP and an antenna to be mounted in the same location. The mount can be fastened to a ceiling or wall, to an I-beam or to a piece of all-thread. The mount allows both horizontal and vertical articulation of the antenna. This mount includes a long TBAR mounting plate and includes special insert holes for APs that use DART connectors.

    The Version 3 has the following modifications:

    • Aruba mounting hole pattern has been added to all included mounting plates for better compatibility with newer Aruba APs.
    • All-thread mounting bracket has been redesigned to enhance mounting security and safety.

    Antenna adapter plates are available for better compatibility:

    SKU: ATS-02854 Categories: ,

  • Universal AP and Antenna Clamp Mount

    Add to Quote Cart

    Universal AP and Antenna Clamp Mount

    The AccelTex Solutions Universal AP and Antenna Clamp Mount system is designed to optimize space and reduce interference in high-density environments. This innovative mount features new adjustable clamping arms that provide universal AP compatibility, flexible mounting options (All-Thread, I-Beam Clamps, Conduit, Gangbox, etc), and easy installation.

    SKU: ATS-04088 Categories: ,

  • Universal AP Clamp Mount

    Add to Quote Cart

    Universal AP Clamp Mount

    The AccelTex Solutions Universal AP Clamp Mount features new adjustable clamping arms that provide universal AP compatibility, flexible mounting options (All-Thread, I-Beam Clamps, Conduit, Gangbox, etc), and easy installation. The AccelTex Solutions Universal AP Clamp Mount features new adjustable clamping arms that provide universal AP compatibility, flexible mounting options (All-Thread, I-Beam Clamps, Conduit, Gangbox, etc), and easy installation

    SKU: ATS-04052 Categories: ,