nTAP 10/100/1000 Copper Deployment

nTAP 10/100/1000 Copper Network TAP Overview
The 10/100/1000 copper nTAP offers a standard Gigabit Ethernet input connection, a standard Gigabit Ethernet output connection and a standard gigabit full-duplex analyser connection. This all-in-one device guarantees scalability as your network grows.

All copper nTAPs replicate the full-duplex signal from the network, sending one signal to the analyser and the other signal back to the network. The 10/100/1000 Copper nTAP can support link speeds up to 2000 Mbps.

As with all nTAPs, the 10/100/1000 copper nTAPs are passive, full-duplex monitoring devices, offering complete visibility into your network regardless of traffic levels. By permanently installing nTAPs, you never need to bring the link down to attach an analyser or other device. nTAPs work with the leading security and network management tools, so you can quickly and easily deploy them into your network.

All copper nTAPs are transparent, which means you can monitor your critical links without data stream interference. Even if power to the nTAP fails, copper nTAPs guarantee continuous network data flow. Copper nTAPs also work well with redundant-enabled devices. So if one side of the nTAP link should fail, the other side can take action by signalling the connected device to switch to a redundant link.

nTAP 10/100/1000 Copper Deployment
Place a 10/100/1000 Copper nTAP between two devices of interest on a full-duplex copper network at speeds up to 1000 Mbps. To successfully analyse the full-duplex link, be sure the monitoring device is equipped with a dual-receive capture card.

nTAP 10/100/1000 Copper Deployment